American Water Heaters - HCG3-119T300-4N
The full line of American high-efficiency condensing water heaters have been designed to provide years of dependable service and feature industry leading technology. Models are available from 120000 to 500000 Btu/h and all deliver thermal efficiencies of 95 percent and higher. The unique helical coil heat exchanger limits weld joints for optimal service life while maximizing heat transfer.
Collection: |
HCG |
Width: |
33.13" |
Height: |
75.75" |
Diameter: |
33.13" |
Depth: |
33.13" |
Weight: |
855 lbs. |
Oversized: |
Yes |
ENERGY STAR: |
Yes |
Warranty: |
3 Years Limited On Tank, 1 Year Limited On Parts |
Prop65 Warning: |
Cancer and Reproductive Harm - https://www.p65warnings.ca.gov/ |
Maximum Gas Inlet Pressure: |
14'' Water Column |
Maximum Input Btu: |
300000 |
Safetylist: |
AHRI Certified, CSA Certified Low-Lead Content, cULus Listed Gas-Fired, NSF/ANSI-5, UL Certified Water Quality ANSI/NSF-5 |
Thermal Efficiency: |
96 percent |
ADDITIONAL PRODUCT INFORMATION:
- Positioned in center of tank, surrounded by water to virtually eliminate radiant heat loss from chamber
- Direct spark ignition
- Spiral heat exchanger keeps hot burner gases swirling, uses centrifugal force to maximize efficiency of heat transfer to water in tank
- Spiral heat exchanger reduces lime scale from forming on water-side surfaces, which maintains energy efficiency over time
- Powered anodes standard on all models provides long-lasting tank protection in varying water conditions
- powered anodes are non-sacrificial
- Automatically adjusts output needed to properly protect the tank
- Glass coating is applied using a liquid slush coating technique to ensure uniform coating
- Heat exchanger coil is glassed both externally and internally for optimum protection
- Conventional power-venting or direct venting
- Vents vertically or through a sidewall
- Front located exhaust and condensate connections allow for easy install and access
- Vents with low cost PVC Schedule 40 intake and exhaust pipe. Approved for optional CPVC Schedule 40, Polypropylene and AL29-4C stainless steel vent materials
- Direct-vent intake and exhaust pipe can terminate separately outside building, or through single opening, using concentric vent assembly
- Down-fired pre-mix burner provides optimum efficiency and quiet operation
- Top-mounted burner position prevents condensation from affecting burner operation
Professional delivery is available for most products we sell. We would be happy to coordinate delivery for you!
HCG3-119T300-4N - American Water Heaters
Phoenix Supply Inc. is proud to present this decorative Natural Gas Water Heater, by American Water Heaters. The HCG3-119T300-4N is made from premium materials, this Natural Gas Water Heater offers great function and value for your home. This fixture is part of American Water Heaters's HCG Collection, so make sure to check out other fixtures to accessorize your room.
American Water Heaters is a leading manufacturer of high-quality water heater products with manufacturing, research and development and corporate offices located in Johnson City, TN. American offers a comprehensive line of residential and commercial water heaters.
American Water Heaters Warranty